20 Standard value table SEN02288-00 BR380JG-1E0 5 Applicable Model BR380JG-1E0 Categ ory Check Item Measurement Condition Unit Standard value Permissible value Travel Hydraulic drift of travel • Stop engine • Hydraulic oil temperature: 45 – 55°C • Stop machine on 12° slope with sprocket side up • Measure hydraulic drift of travel in 5 minutes mm 0 0 Leakage from travel motor • Run engine at full throttle • Hydraulic oil temperature: 45 – 55°C • Lock shoe with lock pin (1) and relieve travel circuit l/mm Max. 13.6 Max. 27.2 Travel speed • Run engine at full throttle • Hydraulic oil temperature:
45 – 55°C • Set primary conveyor in travel posture • After approach run of at least 10 m on flat ground, measure time required to travel 20 m. Lo Sec. 72.0 – 120.0 72.0 – 120.0 Mi 27.2 – 36.8 27.2 – 36.8 Hi 20.9 – 28.2 20.9 – 28.2 Travel deviation • Run engine at full throttle • Hydraulic oil temperature: 45 – 55°C • Set primary conveyor in travel posture • Travel at Hi • After approach run of at least 10 m on flat ground, measure travel deviation in travel of 20 m. a Test on hard and level ground. a Measure dimension x. mm Max. 200 Max. 300