SEN02303-00 30 Testing and adjusting Checking fuel circuit for leakage 1 9. Check the fuel piping and devices for fuel leak- age. a Check mainly around the high-pressure circuit parts coated with the color checker for fuel leakage. a If any fuel leakage is detected, repair it and check again from step 2. a If no fuel leakage is detected, check is completed. k Very high pressure is generated in the high- pressure circuit of the fuel system. If fuel leaks while the engine is running, it is dan- gerous since it can catch fire. After checking the fuel system or removing its parts, check it for fuel leakage according to the following procedure. k Stop the machine on a level ground.
a Clean and degrease the engine and the parts around it in advance so that you can check it easily for fuel leakage. 1. Spray color checker (developer) over the fuel supply pump, common rail, fuel injector, and joints of the high-pressure piping. 2. Run the engine at speed below 1,000 rpm and stop it after its speed is stabilized. 3. Check the fuel piping and devices for fuel leak- age. a Check mainly around the high-pressure circuit parts coated with the color checker for fuel leakage. a If any fuel leakage is detected, repair it and check again from step 2. 4. Run the engine at low idle. 5. Check the fuel piping and devices for fuel leak- age.
a Check mainly around the high-pressure circuit parts coated with the color checker for fuel leakage. a If any fuel leakage is detected, repair it and check again from step 2. 6. Run the engine at high idle. 7. Check the fuel piping and devices for fuel leak- age. a Check around the high-pressure circuit parts coated with the color checker for fuel leakage. a If any fuel leakage is detected, repair it and check again from step 2. 8. Run the engine at high idle and load it. a Relieve the travels (Right and left). 22 BR380JG-1E0