Kaiyi BR380JG-1E0 — MEASURING PPC VALVE OUTPUT PRESSURE

SEN02303-00 30 Testing and adjusting Measuring PPC valve output pressure 1 3. Install nipple P2 and connect it to oil pressure gauge [1] of hydraulic tester P1 . a Use the oil pressure gauge of 5.9 MPa {60 kg/cm 2 }. a Measuring tools for PPC valve output pressure k Stop the machine on a level ground. a Before measuring the PPC valve output pres- sure, check that the basic pressure of the con- trol circuit is normal. a Measure the PPC valve output pressure under the following condition. q Hydraulic oil temperature: Within operat- ing range 4. Start the engine. 1. Open cover (1). 5.

Run the engine at high idle and measure the oil pressure with the control lever in neutral and moved to the stroke end. a If the output pressure is as follows, the PPC valve is normal. 6. After finishing measurement, remove the mea- suring tools and return the removed parts. 2. Remove PPC oil pressure switches (2) and (3) of the circuits to be measured. q Switch (2): Travel signal (Black) q Switch (3): Steering signal (Red) 40 BR380JG-1E0 Symbol Part No. Part name P 1 799-101-5002 Hydraulic tester 790-261-1204 Digital hydraulic tester 2 799-101-5230 Nipple (14 × 1.5) 3 07002-11423 O-ring Operation of lever Output pressure MPa {kg/cm2} Neutral 0 {0} Stroke end Approx. 2.9 {30}