Kaiyi BR380JG-1E0 — MEASURING OIL LEAKAGE

30 Testing and adjusting SEN02303-00 Measuring oil leakage 1 4. Run the engine at high idle, relieve the travel circuit, and measure the oil leakage. a Measuring tools for oil leakage k Before operating the travel lever, check the position and locking direction of the locked sprocket again. k Wrong operation of the lever can cause an accident. Accordingly, make signs and checks securely. a Start measuring the oil leakage 30 sec- onds after relieving is started and mea- sure for 1 minute. a Measure several times, moving the motor a little (changing the position of the valve plate and cylinder and that of the cylinder and piston) each time.

a Measure the oil leakage under the following condition. q Hydraulic oil temperature: Within operat- ing range Measuring oil leakage from travel motor 1. Remove the travel motor cover. 2. Run the engine, lock the travel mechanism, and stop the engine. 5. After finishing measurement, return the removed parts. k Put pin [1] between the sprocket and track frame to lock the travel mecha- nism securely. 3. Disconnect drain hose (1) of the travel motor and block the hose side with a plug. a Use the following part to block the hose side. 07376-70422 (Plug #04) BR380JG-1E0 41 Symbol Part No. Part name Q Commercially available Measuring cylinder