30 Testing and adjusting SEN02304-00 Service menu operation and display 3) Displaying menu screen The display is changed to the initial display of Service Menu program. Select an appropriate item from among the menu. Switching to service menu a When using the service menu, switch the screen through the following special operation. 1) Confirmation of display Make sure that the conventional display is turned on. a Changing to Service Menu is usually avail- able only from this conventional display. No. Service menu 00 Return (Ends the service menu) 2) Switch operation Do the following switch operation. q Switch operation:
[ E ] + [1] o [2] o [3] (Enter the numbers while holding E down) 4) Ending the menu and function When ending the operation from the service menu screen or respective menu screens, select either of the following operations. q Press [ ] switch (enables every screen). q When “RETURN” switch is displayed, press the applicable switch. q When “Return” menu is displayed, select the menu and press [ ] switch. BR380JG-1E0 15 01 Monitoring 02 Abnormality record 03 Maintenance record 04 Maintenance mode change 05 Phone number entry 06 Default 07 Adjustment 08 Cylinder cut out 09 No injection cranking 10 Crusher clearance record 11 Lock cylinder slip record