Kaiyi BR380JG-1E0 — SPECIAL FUNCTIONS OF MACHINE MONITOR

SEN02304-00 30 Testing and adjusting 20. Monitoring [01] function The machine monitor monitors signals from the switch sensor actuators on various machine parts. It allows displaying and checking the monitored information through following opera- tions. q Select menu “99999” and press [ ] switch. a When you have registered all the items that can be registered, the screen will be automatically switched to the monitoring information screen. a Monitored information are transmitted via communication circuits. Thus the number of selected items can impact the communication speed. If truly real time monitoring is required, reduce the selected items to the minimum.

a For details on the monitoring items, display unit, etc., refer to the “Monitor- ing Items table”. 1) Menu selection Select “01 Monitoring” in the initial display of Service Menu and depress [ ] switch. 3) Operation for monitoring As the monitoring information screen is displayed, confirm the monitored informa- tion operating the machine. 2) Setting a monitoring item Select and register an item to be moni- tored through the following switch opera- tion. q [ E ] switch: Selection q [ R ] switch: Selection q [ ] switch: Registration 4) Monitored information holding function You can hold every monitored information by pressing [ E ] while monitoring is contin- ued.

If you press [ R ] switch again in this condi- tion, the currently held information will be released. a A monitoring item can be set from 1 to 4 at maximum (Depending upon the selected item, the max. number can be less than four) a In case of monitoring 1 to 3 items, move to the monitoring information screen through any of the following switch operations after the registra- tion work has been completed. q [Hold down [ ] switch (for about 3 seconds). 16 BR380JG-1E0