30 Testing and adjusting SEN02304-00 4) Description of individual setting items (1): Default value: The maintenance time set in the monitor (recommended by the manufacturer and cannot be changed). (2): Set value: Denotes the maintenance time that can be freely set. The main- tenance mode operates based on this time (the time can be increased or decreased in multiple of 50 hours by use of [ E ] and [ R ] switches). (3): Use (On): Maintenance display func- tion for this item is enabled. (4): Not use (Off): Maintenance display function for this item is disabled. a The lower limit of this setting is 50 hours.
14 Initialize all items a 01 and 14 menus are provided for setting the whole maintenance mode, while those from 02 through 13 are for setting individual items. 3) Contents of Maintenance Mode On/Off q Use (On): The maintenance display function of all oil and filter-related items are turned effectual. (Irrespec- tive of whether “On” or “Off” set for individual items, this setting prevails) 5) Description of “Initialize all items” Select this menu and then press [ ] switch to restore the default value for the individually set information. q Not use (Off):
The maintenance dis- play function of all oils and filter- related items is disabled (prece- dence is given to this setting over the “On” or “Off” selected for an individual items). BR380JG-1E0 23 Number Items of the maintenance mode change 00 Return (End of change in the maintenance mode) 01 Maintenance mode on/off 02 Engine oil change int. 03 Engine oil filter change int. 04 Fuel main filter change int. 05 Hyd oil filter change int. 06 Hyd tank breather change int. 07 Corrosion resistor change int. 08 Damper case service int. 09 Final drive case oil change int. 10 Feeder vibration oil change int. 11 Crusher motor case oil change int. 12 Hydraulic oil change int.
13 Fuel pre-filter change int.