SEN02304-00 30 Testing and adjusting 24. Function of phone number entry [05] When the user code is displayed, following procedure allows entering or correcting the phone numbers to be displayed alternately with the failure code. a If a telephone number is not input, the phone number screen is not displayed. 3) Entry and setting phone number Following the method explained below, entry a phone number in the “Phone Num- ber Entry” display. (Entry automatically begins with a cursor at the left end) 1) Menu selection Select “05 Phone Number Entry” menu from the Service Menu initial screen and then depress [ ] switch.
1] Using the numerical keypad, enter the number starting with the cursor position situated at the left end. a Numbers can be entered up to the max. 12 digits, but omit unnecessary digits. a When entered a wrong number, depress [B] switch to return the cursor by one digit. 2] Depress [ ] switch when all the num- bers have been entered. a As the input is finished, the screen changes to entry screen shown above. If the entered phone number is shown on this display, the input is normal. 2) Changing the display Select “Entry” next to change the display to the “Phone Number Entry” display. a Even if a Phone number is already inputted, it is deleted if you switch the “Phone Number Entry” screen.
24 BR380JG-1E0