SEN02304-00 30 Testing and adjusting 1] Check that the display is in the ordi- nary display mode. 2] Set mode selector switch (1) of the main control box in the testing mode position. 3] Set clearance adjustment selector switch (2) of the main control box in the manual mode position. 4] Rotate the crusher with crusher man- ual forward switch (3) and reverse switch (4) of the machine monitor to bring mark (B) of the flywheel to the center of adjustment range (A). 5] Depress crusher clearance closing switch (5) of the machine monitor to press the swing jaw of the crusher against the fixed jaw (and the monitor buzzer sounds).
7) Function for option registration Use/Disuse of the options of the machine can be set. 1] On the option setting menu screen, move the cursor with the [ E ] switch and [ R ] switch to an option to be adjusted and press the [ ] switch. 6] Select the service menu to display the clearance potentiometer initialization screen. 7] Depress “1” (SET) on the clearance potentiometer initialization screen. 2] The screen changes to the use (on)/ disuse (off) setting screen for the selected option. Move the cursor with the [ E ] switch and [ R ] switch to “Use”/“Disuse” and press the [ ] switch.
3] When the option is set normally, the monitor buzzer sounds for 3 seconds and then the screen returns to the previous screen. 28 BR380JG-1E0 Number Option registration menu 00 Return (Finish adjustment) 01 Magnetic separator 02 Muck discharge conveyor 03 Overfeed sensor 04 2nd conveyor 05 Vibrator screen 06 Travel lever