30 Testing and adjusting SEN02304-00 28. Function of no injection cranking [09] No injection cranking of the engine is available from the machine monitor. No injection cranking denotes stopping injec- tion of fuel from the injector even if the engine is run from the starting motor. This mode is used, for instance, for measurement of com- pressive pressure. a This setting must be done after stopping the engine. 3) As the checkup is over, following screen appears. 1) Selecting menu Select “09 No Injection Cranking” from the Service Menu initial screen and press [ ] switch. 4) Select “No Injection” and press [ ] switch. “Under Preparation” will be displayed on the screen.
a The letters “Under Preparation” are displayed in red. 2) The initial screen for the no injection cranking will appear. a “Check Communication” will be dis- played in red. BR380JG-1E0 31