Kaiyi BR380JG-1E0 — CHECK AND ADJUSTMENT OF OUTLET CLEARANCE

SEN02305-01 30 Testing and adjusting Check and adjustment of outlet clearance Check of outlet clearance Outlet clearance A (opening end) means the dis- tance from the tip of the fixed jaw plate to the bot- tom of the movable tooth when the crusher outlet is fully open. Measure at three places (both ends and the center) and take the value for the smallest clearance as the representative value. a When measuring outlet clearance A , it is con- venient to use a jig as shown in the example below. (Example) Length = approx. 1500 mm, diame- ter of rod = φ 6 to 10 mm at both ends. Weld a rod of the commonly used outlet clearance dimension (for example: 50 mm) to an H- shape.

(A) Crusher outlet clearance (B) Lock cylinder (C) Fixed jaw plate (D) Swing jaw plate 4 BR380JG-1E0