SEN02305-01 30 Testing and adjusting Check of wear on major wearing parts Jaw plate k When checking the wear, stop the crusher, then stop the engine and check the wear. k If the machine is used continuously with the crusher chamber excessively charged, premature partial wear will develop on the tips of jaw plates. k If a work is continued with the partially worn jaw plates, rocks may not be discharged smoothly, eventually resulting in damages on the jaw plates on account of the worsened partial wear. Replace the partially worn jaw plates with new ones. k If jaw plates are used beyond their wear limit, a serious damage will be inflicted on the jaw crusher main body itself. (1):
Hypothetical wear range (hatched portion) (2): Tooth plate (3): Frame Wear limit height (mm) Height from mount- ing face of tooth plate to groove in tooth plate 34 65 a Even if dimension (A) and (B) have not reached the wear limit, if position (C) (100 – 300 mm from the bottom end) is the same as the bottom end portion and the protrusion of the tooth has been worn and the tooth has become flat, turn the tooth plate or replace it. 14 BR380JG-1E0 New part mm) Fixed jaw (A) 44 Swing jaw (B) 75