30 Testing and adjusting SEN02305-01 Cheek plate Carry out replacement when the remaining dimen- sion reaches approx. 15 mm (wear amount: 10 mm) at the top, and approx. 10 mm (wear amount: 15 mm) at the bottom. a When replacing the cheek plate, replace the cheek plate mounting bolts also at the same time. Swing jaw plate wedge Replace when remaining dimension (A) at the bot- tom of the wedge is approx. 79 mm (wear amount (B): 10 mm). Replace also if part of the wedge is worn unevenly. Toggle seat If the wear dimension reaches approx. 5 mm, pro- ceed with the replacement. (A) Wear amount: 5 mm (B) 50 mm (C) 30 mm Protector Replace when the remaining dimension is approx. 10 mm (wear amount:
10 mm). Replace also if part of the protector is worn unevenly. (A) Wear amount: 10 mm (B) Protector thickness: 19 mm BR380JG-1E0 15