Kaiyi BR380JG-1E0 — CHECK AND ADJUSTMENT OF OUTLET CLEARANCE

30 Testing and adjusting SEN02305-01 Remove the fixed jaw wedge bolt spring cover assembly as follows. 1) Loosen locknut (4) and tighten until spring holder push bolt (5) contacts spring holder (6). 2) Remove wedge bolt locknut (7), nut (8), and washer (9). 3. Lift up the fixed jaw plate with a wire rope. q When reversing the fixed jaw plate, lower it on to a block once. Then hook a wire rope on the other side to lift it up and insert it into the crusher frame. q When replacing the worn fixed jaw plate, lower it on to a block once. Then lift up a new fixed jaw plate with a wire rope and insert it into the crusher frame. 3) Remove spring cover assembly (10) and raise it with wire.

BR380JG-1E0 21