Kaiyi BR380JG-1E0 — CHECK AND ADJUSTMENT OF OUTLET CLEARANCE

SEN02305-01 30 Testing and adjusting Reversal or replacement of fixed jaw plate k This machine uses cover assembly (1) with springs built into the fixed jaw plate wedge portion and swing jaw plate wedge portion. If bolts (2) of the front face of the cover are removed during disassembly, there is dan- ger that the internal parts will fly out and cause injury. k After removing the fixed jaw plate, com- pletely remove soils, sand, etc. from the fixed jaw fitting surfaces (front frame and mount stopper upper surface). Unless removed completely, they may cause a backlash on the fixed jaw plate.

If the clearance is not even on the right and left sides, there will be a slippage from the swing jaw plate tip, which likely leads to premature wear or partial wear on the jaw plates. 1. Remove the cheek plate. For details, see “Replacement of cheek plate”. 2. Remove the fixed jaw wedge bolt spring cover assembly, fixed jaw wedge bolt, and fixed jaw wedge block. Tools to use Wrench: Accessory tool No. 1 Handle: Accessory tool No. 3 Socket: Accessory tool No. 5 Wrench: Accessory tool No. 7 Pipe: Accessory tool No. 8 Adjustable wrench: Accessory tool No. 12 Wrench: Accessory tool No.

13 k For details of the accessory tool, see “Crusher accessory tool” in Mainte- nance volume of the operation and maintenance manual. 20 BR380JG-1E0