Kaiyi BR380JG-1E0 — CHECK AND ADJUSTMENT OF OUTLET CLEARANCE

30 Testing and adjusting SEN02305-01 4. While lifting, hit the area around the cheek plate with a medium-sized hammer. (Hit the places marked q in the diagram.) Tool to use Hammer: Accessory tool No. 17 8. Insert new cheek plates in order from the underside along the fixed jaw and a guide of the side frame. k For details of the accessory tool, see “Crusher accessory tool” in Mainte- nance volume of the operation and maintenance manual. 9. Tighten the cheek plate lock bolts. Top cheek plate (1): M24 x 2 (each side) Bottom cheek plate (2): M24 x 1 (each side) Tools to use Wrench: Accessory tool No. 1 Handle: Accessory tool No. 3 Extension: Accessory tool No. 4 Socket: Accessory tool No.

5 Wrench: Accessory tool No. 7 Pipe: Accessory tool No. 8 k For details of the accessory tool, see “Crusher accessory tool” in Mainte- nance volume of the operation and maintenance manual. 5. When cheek plate (1) comes free, remove the mounting bolts and lift up. 4 Top cheek plate (1): 74.0 kg 6. Repeat the same procedure to lift up bottom cheek plate (2). 4 Bottom cheek plate (2): 36.0 kg 7. After removing all the cheek plates, completely remove the soil and sand from the cheek plate fitting surfaces (front, rear, right and left). In particular, remove the soil and sand clog- ging both sides of the fixed jaw. BR380JG-1E0 19