30 Testing and adjusting SEN02305-01 Replacement of crusher driving V-belt 1. Secure the crusher inspection hatch in the open position. 4. Turn the crusher V-belt adjustment turnbuckle (3) to reduce distance (L) between the yokes. 2. Loosen the bolts of flywheel cover (1) at the side of the top step to release it, and at the same time, remove motor cover (2). 3. Loosen locknuts (4) and (5) of crusher V-belt adjustment turnbuckle (3). (Locknut (5) turns in the opposite direction to normal.) Tools to use Wrench: Accessory tool No. 1 Wrench: Accessory tool No. 11 k For details of the accessory tool, see “Crusher accessory tool” in Mainte- nance volume of the operation and maintenance manual.
BR380JG-1E0 35