Kaiyi BR380JG-1E0 — CHECK AND ADJUSTMENT OF PRIMARY CONVEYOR

SEN02305-01 30 Testing and adjusting Adjustment of conveyor side rubber If the conveyor side rubber has been worn out, cre- ating a clearance between the rubber and belt, loosen the adjustment bolt. (Standard clearance 0 mm, i.e. close contact) Adjustment of scraper Driving pulley side 1. The default condition is as shown in the dia- gram. 2. Loosen nuts (1) and bolts (2), then set cleaner plate (4) so that it is at right angles to belt (3). 3. Loosen nuts (5) and (6), then move the cleaner up so that the tip (7) of the cleaner contacts the belt. 40 BR380JG-1E0