Kaiyi BR380JG-1E0 — CHECK AND ADJUSTMENT OF MUCK DISCHARGE CONVEYOR

SEN02305-01 30 Testing and adjusting Check and adjustment of muck discharge conveyor 2. When the belt is deflected to the right, move the belt in the direction indicated with an arrow. (1): Direction of travel of belt k There is always the danger that you get caught in the revolving parts of the con- veyor, while inspecting or cleaning it. Be sure to stop the engine before starting the work. If the belt is not slackened k Stop the engine first and start to work on the adjusting bolt (1). If the conveyor belt is slackened, it tends to slip off and does not perform properly. Adjust the belt ten- sion by turning the adjusting bolts (1) on the right and left sides of the belt.

Check of each part in belt conveyor for any stuck foreign object Remove a stone, wire shred, gravel, etc. that are stuck at the backside of the belt conveyor, or in between the rollers and belt, or inside the hopper rubber and belt. If the belt is not deflected 1. When the belt is deflected to the left, move the belt in the direction indicated with an arrow. (1): Direction of travel of belt 46 BR380JG-1E0