SEN02305-01 30 Testing and adjusting 13) Turn the starting switch OFF. 14) Make sure that the 7-segment indicator lamp comes on normally in 10 seconds. a As [Normal] is displayed, the station opening inspection is complete. a If [Abnormal] is displayed, the inspec- tion is incomplete and must be repeated from step 1). 2. Application for start of use a The application for start of use is allowed only after the terminal station opening inspection has been successfully ended. 1) Concerning the machine body for which the station opening inspection has been completed, report the following informa- tion to the person responsible to operation of KOMTRAX.
(1) Information of the machine body for which the station opening inspection has been completed (machine model, model number and serial number) (2) Part number and serial number of KOMTRAX terminal (3) The service meter reading when KOMTRAX terminal was installed (in 0.1 h unit) 2) The person responsible to operation of KOMTRAX shall register the machine body using the KOMTRAX client PC. a See “KOMTRAX administrator man- ual” for the procedure. a Above completes the necessary oper- ations. 52 BR380JG-1E0