Kaiyi BR380JG-1E0 — KOMTRAX TERMINAL LAMP INDICATIONS

30 Testing and adjusting SEN02305-01 2. Display contents of LED for CPU a Turn ON, START the starting switch or the engine prior to inspection of LED display. a Types of flashing and flashing duration Quick flashing: Flashing of approximately 1 second cycle Slow flashing: Flashing of approximately 4 seconds cycle 3. Display contents of 7-segment and dots for CPU a Turn ON the starting switch prior to inspection of LED display. * In a outdoor location within radio waves penetration range, it sometimes takes more than a minute from turning on of the starting switch to completion of the positioning. Positioning is not available in a location where radio waves are extremely weak or unreachable.

BR380JG-1E0 55 No. LED Name and function Display Contents of display 6 LED-C1 State of starting switch ACC signal, alternator R signal ON Starting switch ACC signal: ON, Alternator R signal: ON Quick flashing Starting switch ACC signal: ON, Alternator R signal: OFF Slow flashing Starting switch ACC signal: OFF, Alternator R signal: ON OFF Starting switch ACC signal: OFF, Alternator R signal: OFF 7 LED-C2 State of engine control signal ON Engine control signal: ON OFF Engine control signal: OFF 8 LED-C3 State of S-NET connec- tion and starting switch C signal ON S-NET: Connection and starting switch C signal: OFF Quick flashing Starting switch C signal: ON Slow flashing (Not used) OFF S-NET:

Non-connection and starting switch C signal: OFF 9 LED-C4 State of CAN connec- tion ON CAN: Present (Fuel sensor: Absent) Quick flashing CAN: Present (Fuel sensor: Present) Slow flashing CAN: Absent (Fuel sensor: Present) OFF CAN: Absent (Fuel sensor: Absent) 10 LED-C5 Download writing state Single side ON Download writing mode (Special function for system administrator) 11 LED-C6 Both sides OFF Normal working mode No.

Display unit Name and function Display Contents of display 12 7-segment Number of mails not transmitted yet 0 – 9 Number of mails not transmitted yet 13 Dot State of position- ing with GPS ON Positioning with GPS complete (Position is recognized See * mark) OFF Positioning with GPS incomplete (Position is not recognized See * mark)