Kaiyi BR380JG-1E0 — FAILURE CODE [7RF2KA] DISCONNECTION IN CRUSHER FORWARD EPC VALVE

SEN02090-00 40 Troubleshooting Failure code [7RF2KA] Disconnection in crusher forward EPC valve 1 Circuit diagram related to crusher forward EPC solenoid 40 BR380JG-1E0 User code Failure code Trouble Disconnection in crusher forward EPC valve (Work equipment and pump controller (work equipment control) system) — 7RF2KA Contents o trouble f • Open circuit is detected when EPC valve solenoid for crusher forward rotation is driven. Action of controller • Turns the output to the crusher forward EPC valve circuit OFF. • Even if cause of failure disappears, system does not reset itself until engine starting switch is turned OFF.

Problem tha appears on machine t • The crusher does not operate forward. • When this trouble is detected, the horn sounds (3 times intermittently). Related information • The drive current of the valve solenoid for crusher forward rotation can be checked with the monitor- ing function. (Code: 25900, Crusher FWD EPC Curr.) • Since the controller detects disconnection while the solenoid output is turned ON, be sure to turn the solenoid output ON when checking for reproduction of the failure after repair. • The failure history is recorded.

Possible causes and standard val in normal sta Cause Defective crusher forward EPC valve 1 solenoid (Internal dis- connection) Disconnection in wiring harness (Disconnection in wir- ue 2 ing harness or defec- te tive contact in connector) Defective work equip- 3 ment and pump con- troller Standard value in normal state/Remarks on troubleshooting aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. V02 (male) Resistance Between (1) and (2) 7 – 14 z aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON.

Wiring harness between C03 (female) (26) – A01 – V02 (female) (2) Resistance Max. 1 z Wiring harness between C03 (female) (13), (23) – V02 (female) (1) Resistance Max. 1 z aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. C02 (female) Resistance Between (26) and (13), (23) 7 – 14 z