40 Troubleshooting SEN02090-00 Failure code [7RF3KA] Disconnection in crusher reverse EPC valve 1 Circuit diagram related to crusher reverse EPC solenoid BR380JG-1E0 43 User code Failure code Trouble Disconnection in crusher reverse EPC valve (Work equipment and pump controller (work equipment control) system) — 7RF3KA Contents o trouble f • Open circuit is detected when EPC valve solenoid for crusher reverse rotation is driven. Action of controller • Turns the output to the crusher reverse EPC valve solenoid circuit OFF. • Even if the cause of the failure disappears, the system does not reset itself until the engine starting switch is turned OFF.
Problem th appears o machine at • The crusher does not operate in reverse. n • When this trouble is detected, the horn sounds (3 times intermittently). Related information • The drive current of the EPC valve solenoid for crusher reverse rotation can be checked with the monitoring function. (Code: 26000, Crusher REV EPC Curr.) • Since the controller detects disconnection while the solenoid output is turned ON, be sure to turn the solenoid output ON when checking for reproduction of the failure after repair. • The failure history is recorded.
Possible causes an standard val in normal sta Cause Defective crusher reverse EPC valve 1 solenoid (Internal dis- connection) Disconnection in wiring harness d (Disconnection in wir- ue 2 ing harness or defec- te tive contact in connector) Defective work equip- 3 ment and pump con- troller Standard value in normal state/Remarks on troubleshooting aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. V01 (male) Resistance Between (1) and (2) 7 – 14 z aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON.
Wiring harness between C03 (female) (36), A01 and V01 (female) (2) Resistance Max. 1 z Wiring harness between C03 (female) (13), (23), A01 and V01 (female) (1) Resistance Max. 1 z aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. C03 (female) Resistance Between (36) and (13), (23) 7 – 14 z