Kaiyi BR380JG-1E0 — FAILURE CODE [7RF2KY] SHORT CIRCUIT IN CRUSHER FORWARD EPC VALVE

SEN02090-00 40 Troubleshooting Failure code [7RF2KY] Short circuit in crusher forward EPC valve 1 Circuit diagram related to crusher forward EPC solenoid 42 BR380JG-1E0 User code Failure code Trouble Short circuit in crusher forward EPC valve (Work equipment and pump controller (work equipment control) system) — 7RF2KY Contents o trouble f • Hot short circuit (contact with 24 V circuit) is detected when EPC valve solenoid for crusher forward rotation is not driven. Action of controller • None in particular. • If the cause of the failure disappears, the system resets itself. Problem tha appears on machine t • The crusher does not stop operating forward.

• When this trouble is detected, the horn sounds (3 times intermittently). Related information • The failure history is recorded. Possible causes and standard val in normal sta Cause Hot short with wiring 1 harness (Contact with 24-V circuit) ue te Defective work equip- 2 ment and pump con- troller Standard value in normal state/Remarks on troubleshooting aPrepare with engine starting switch OFF, then turn engine starting switch ON and carry out troubleshooting. Between wiring harness between C03 (female) (26) – A01 – V02 (female) (2) and chassis ground Voltage Max. 1 V If cause 1 is not detected, work equipment and pump controller may be defective.

(Since trouble is in system, troubleshooting cannot be carried out.)