Kaiyi BR380JG-1E0 — FAILURE CODE [7RFBKB] SHORT CIRCUIT IN MUCK CONVEYOR SOLENOID

SEN02091-00 40 Troubleshooting Failure code [7RFBKB] Short circuit in muck conveyor solenoid 1 Related electrical circuit diagram 8 BR380JG-1E0 User code Failure code Trouble Short circuit in muck conveyor solenoid (Work equipment and pump controller (work equipment control) system) — 7RFBKB Contents of trouble • When the muck discharge conveyor solenoid was driven, ground short circuit was detected. Action of controller • Turns OFF the output to the muck discharge conveyor solenoid circuit. • Even if cause of failure disappears, system does not reset itself until engine starting switch is turned OFF. Problem tha appears on machine t • The muck discharge conveyor does not work.

• Horn sounds (three intermittent sounding) upon detecting a failure. Related information • The drive state (ON/OFF) of the muck conveyor solenoid can be checked with the monitoring func- tion (Code: 25500, Solenoid Valve) • Since the controller detects ground short circuit while the muck conveyor solenoid is driven, be sure to turn the solenoid output ON when checking reproduction of the failure after repair. • The failure history is recorded.

Possible causes and standard valu in normal sta Cause Defective muck dis- charge conveyor sole- 1 noid (Internal short circuit or grounding) Grounding fault in wir- 2 ing harness (Contact e with ground circuit) te Defective work equip- 3 ment and pump controller Standard value in normal state/Remarks on troubleshooting ective muck dis- rge conveyor sole- (Internal short uit or grounding) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON.

AV3 (male) Resistance Between (1) and (2) 20 – 60 z unding fault in wir- harness (Contact ground circuit) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. Wiring harness between C03 (female) (18) – A02 – AV3 (female) (2) and chassis ground Resistance Min. 1 Mz ective work equip- nt and pump troller aPrepare with engine starting switch OFF, then turn engine starting switch ON and carry out troubleshooting. C03 (male) Muck discharge conveyor Voltage Between (18) and chassis ground Holds in position. Max. 1 V Operating 20 – 30 V