Kaiyi BR380JG-1E0 — FAILURE CODE [7RFLKY] SHORT CIRCUIT IN ACCESSORY EPC SOLENOID

SEN02091-00 40 Troubleshooting Failure code [7RFLKY] Short circuit in accessory EPC solenoid 1 Related electrical circuit diagram 24 BR380JG-1E0 User code Failure code Trouble Short circuit in accessory EPC solenoid (Work equipment and pump controller (work equipment control) system) — 7RFLKY Contents o trouble f • When the accessory drive EPC valve circuit is not driven, hot short (contact with 24 V circuit) is detected. Action of controller • None in particular. • When the cause of failure disappears, system is reset by itself.

Problem tha appears on machine • If the primary conveyor vertical operation, muck discharge conveyor vertical operation, and lock cyl- t inder push/pull switch have failed, these operations do not stop. (If they do not stop, press the engine stop switch or turn OFF the engine starting switch.) • Horn sounds (three intermittent sounding) upon detecting a failure. Related information • The failure history is recorded.

Possible causes an standard val in normal sta Cause Hot short in wiring har- 1 ness (Contact with 24V d circuit) ue te Defective work equip- 2 ment and pump con- troller Standard value in normal state/Remarks on troubleshooting aPrepare with engine starting switch OFF, then turn engine starting switch ON and carry out troubleshooting. Wiring harness between C03 (female) (28) – A01 – V04 (female) (2) and chassis ground Voltage Max. 1 V If cause 1 is not detected, work equipment and pump controller may be defective. (Since trouble is in system, troubleshooting cannot be carried out.)