Kaiyi BR380JG-1E0 — FAILURE CODE [7RFNKB] SHORT CIRCUIT IN LOCK CYLINDER UNLOCK SOLENOID VALVE

40 Troubleshooting SEN02091-00 Failure code [7RFNKB] Short circuit in lock cylinder unlock solenoid valve 1 Related electrical circuit diagram BR380JG-1E0 31 User code Failure code Trouble Short circuit in lock cylinder unlock solenoid valve (Work equipment and pump controller (work equipment control) system) — 7RFNKB Contents of • trouble When the output to the lock cylinder unlock solenoid circuit is driven, ground short circuit is detected. • Action of • controller Turns the output to each solenoid of lock cylinder unlock, push and pull OFF. Even if cause of failure disappears, system does not reset itself until engine starting switch is turned OFF.

Problem that • appears on • machine The lock cylinders are not released (or the crusher clearance cannot be adjusted). Horn sounds (three intermittent sounding) upon detecting a failure. • Related • information • The drive state (ON/OFF) of the lock cylinder unlock solenoid can be checked with the monitoring function (Code: 25500, Solenoid Valve) Since the controller detects a ground short circuit when the lock cylinder unlock solenoid is driven, turn the output ON for reproduction check after recovery. The failure history is recorded.

1 Possible causes and standard value 2 in normal state 3 Cause Standard value in normal state/Remarks on troubleshooting Defective lock cylinder unlock solenoid (Inter- nal short circuit or dis- connection) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. AV2 (male) Resistance Between (1) and (2) 20 – 60 z Disconnection in wiring harness (Contact with ground circuit) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. Wiring harness between C03 (female) (17) – A02 – AV2 (female) (2) and chassis ground Resistance Min.

1 Mz Defective work equip- ment and pump controller aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. C03 (male) Resistance Between (17) and chassis ground 20 – 60 z