SEN02091-00 40 Troubleshooting Failure code [7RFNKY] Short circuit in lock cylinder unlock solenoid valve 1 Related electrical circuit diagram 32 BR380JG-1E0 User code Failure code Trouble Short circuit in lock cylinder unlock solenoid valve (Work equipment and pump controller (work equipment control) system) — 7RFNKY Contents of • trouble When the lock cylinder unlock solenoid circuit is not driven, hot short (contact with 24 V circuit) is detected. Action of • controller None in particular. Problem that • appears on machine • The lock cylinders are always released. If the crusher is operated in this status, a slip of lock cylinder is detected and the crusher is stopped.
Horn sounds (three intermittent sounding) upon detecting a failure. • Related information • The drive state (ON/OFF) of the lock cylinder unlock solenoid can be checked with the monitoring function (Code: 25500, Solenoid Valve) The failure history is recorded. 1 Possible causes and standard value 2 in normal state 3 Cause Standard value in normal state/Remarks on troubleshooting Defective lock cylinder unlock solenoid (Inter- nal defect) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON.
AV2 (male) Resistance Between (1) and (2) 20 – 60 z Hot short in wiring har- ness (Contact with 24V circuit) aPrepare with engine starting switch OFF, then turn engine starting switch ON and carry out troubleshooting. Wiring harness between C03 (female) (17) – A02 – AV2 (female) (2) and chassis ground Voltage Max. 1 V Defective work equip- ment and pump controller aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. C03 (male) Voltage Between (17) and chassis ground Max. 1 V