Kaiyi BR380JG-1E0 — FAILURE CODE [CA435] ABNORMALITY IN ENGINE OIL PRESSURE SWITCH

SEN02093-00 40 Troubleshooting Failure code [CA435] Abnormality in engine oil pressure switch 1 Circuit diagram related to engine oil pressure switch 14 BR380JG-1E0 User code Failure code Trouble Abnormality in engine oil pressure switch (Engine controller system) E15 CA435 Contents of trouble • There is error in signal circuit of engine oil pressure switch. Action of controller • None in particular. Problem that appears on machine • Engine protection function based on engine oil pressure does not work. • Engine oil pressure monitor does not display normally Related information • Method of reproducing failure code: Turn starting switch ON or start engine.

Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting Defective engine oil 1 pressure switch aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. OIL PRESSURE SWITCH (male) Resistance Between (1) – chassis ground Max. 10 z Disconnection in wiring harness (Disconnec- 2 tion in wiring or defec- tive contact in connector) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. Wiring harness between CE01 (female) (17) – OIL PRESSURE SWITCH (female) (1) Resistance Max.

10 z Short circuit in wiring 3 harness (with another wiring harness) aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. Wiring harness between CE01 (female) (17) – each of CE01 (female) pins (With all wiring har- ness connectors disconnected) Resistance M in. 100 kz Defective wiring 4 harness connector Connecting parts between engine oil pressure switch – engine wiring har- ness – engine controller may be defective. Check them directly.

• Looseness of connector, breakage of lock, or breakage of seal • Corrosion, bend, breakage, push-in, or expansion of pin • Moisture or dirt in connector or defective insulation Defective engine 5 controller aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. CE01 (male) Resistance Between (17) – chassis ground Max. 10 z