SEN02093-00 40 Troubleshooting Failure code [CA442] Power source voltage too high 1 18 BR380JG-1E0 User code Failure code Trouble Power source voltage too high (Engine controller system) E10 CA442 Contents of trouble • There is high voltage (36 V or higher) in controller power supply circuit. Action of controller • None in particular. Problem that appears on machine • Engine may stop. Related information • Method of reproducing failure code: Turn starting switch ON.
Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective battery voltage aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. Battery Voltage Between (+) – (–) terminals Max. 32 V 2 Defective alternator aPrepare with engine starting switch OFF, then start engine and carry out troubleshooting. E12 (male) Engine speed Voltage Between (1) – chassis ground Medium or higher 27.5 – 29.5 V 3 Defective engine controller aPrepare with engine starting switch OFF, then turn engine starting switch ON and carry out troubleshooting. CE03 (male) Voltage Between (3) – (1) Max.
32 V