40 Troubleshooting SEN02093-00 Circuit diagram related to engine controller power supply BR380JG-1E0 17 Possible causes an standard va in normal st Cause Defective wiring 8 harness connector d lue ate Defective engine 9 controller Standard value in normal state/Remarks on troubleshooting Connecting parts between fuse No. 3 – machine wiring harness – engine controller may be defective. Check them directly.
• Looseness of connector, breakage of lock, or breakage of seal • Corrosion, bend, breakage, push-in, or expansion of pin • Moisture or dirt in connector or defective insulation aPrepare with engine starting switch OFF, then turn engine starting switch ON and start engine and carry out troubleshooting in each case. CE03 (male) Engine starting switch Voltage ON Min. 24 V Between (3) – (1) START Min. 12 V Engine starting switch V oltage ON M START M in. 24 V in. 12 V