Kaiyi BR380JG-1E0 — FAILURE CODE [DXA0KB] SHORT CIRCUIT IN PC-EPC SOLENOID

40 Troubleshooting SEN02094-00 Failure code [DXA0KB] Short circuit in PC-EPC Solenoid 1 Related electrical circuit diagram BR380JG-1E0 33 User code Failure code Trouble Short circuit in PC-EPC Solenoid (Work equipment and pump controller (pump control) system) E02 DXA0KB Contents o trouble f • When the PC-EPC solenoid is driven, ground short circuit is detected. Action of controller • Turns OFF the PC-EPC solenoid output. • Even if cause of failure disappears, system does not reset itself until starting switch is turned OFF. Problem th appears o machine at • When the pump load increases, engine speed lowers sharply and may cause engine stall.

n • Horn sounds (three intermittent sounding) upon detecting a failure. Related informatio • PC-EPC electric current value can be checked with the monitoring function. (Code: 01300, PC-EPC Sol. Curr.) n • The failure history is recorded. • Method of reproducing failure code: turn engine starting switch ON.

Possible causes an standard val in normal st Cause Defective PC-EPC 1 solenoid (Internal short circuit or ground fault) d ue Grounding fault in wir- ate 2 ing harness (Contact with ground circuit) Defective work equip- 3 ment and pump con- troller Standard value in normal state/Remarks on troubleshooting aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. V06 (male) Resistance Between (1) and (2) 7 – 14 z Between (1) and chassis ground Min. 1 Mz aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON.

Wiring harness between C03 (female) (16) – V06 (female) (1) and chassis ground Resistance Min. 1 Mz aPrepare with engine starting switch OFF, then carry out troubleshooting without turning engine starting switch ON. C03 (female) Resistance Between (16) and (3) 7 – 14 z