Kaiyi BR380JG-1E0 — E-5 THE WHOLE WORK EQUIPMENT STOPS SUDDENLY

40 Troubleshooting SEN02095-00 Relative electrical circuit diagram BR380JG-1E0 15 Possible causes and standard value in normal state Cause Disconnection in wiring harness (Disconnec- 5 tion in wiring harness or defective contact in connector) Short circuit with chas- sis ground in wiring 6 harness (Contact with ground circuit) Hot short in wiring har- 7 ness (Contact with 24 V) Standard value in normal state/Remarks on troubleshooting aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between B28 (10) – B13 (fem (4) ale) Resistance M ax. 1 z Wiring harness between B13 (female) (3) – (female) (11) C01 Resistance M ax.

1 z aPrepare with starting switch OFF (Keep the conveyor lower), then carry out troubleshooting without turning starting switch ON. Wiring harness between B28 (10) – B13 (fem (4) – circuit branch end ale) Resistance M in. 1 Mz Wiring harness between B13 (female) (3) – (female) (11) and chassis ground C01 Resistance M in. 1 Mz Wiring harness between S21 (female) (B) – – C02 (female) (13) and chassis ground A04 Resistance M in. 1 Mz Wiring harness between S22 (female) (B) – – C01 (female) (20) and chassis ground A04 Resistance M in. 1 Mz aPrepare with starting switch OFF (Turn mode selector switch to work position), then turn starting switch ON and carry out troubleshooting.

Wiring harness between B13 (female) (2) – (female) (5) – circuit branch end C01 Voltage M ax. 1 V