SEN02095-00 40 Troubleshooting E-8 Some items are not displayed on the machine monitor 1 E-9 Contents of display by machine monitor are different from applicable machine 1 22 BR380JG-1E0 Trouble • When the starting switch is turned ON, some items are not displayed on the machine monitor. Related information — Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective machine monitor Troubleshooting cannot be carried out since the defect is in the machine monitor.
(If the above cause is not the cause of the failure, the machine monitor must be defective.) Trouble • Contents of display by machine monitor are different from applicable machine. Related information — Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective model code signal (Internal defect) In the case monitoring display is not normal, proceed to failure code [DA2SKQ]. Monitoring code Item Normal display 00200 Controller model code Select model BR380JG-a 2 Defective machine monitor Since trouble is in system, troubleshooting cannot be carried out.
(If causes stated above are not detected, engine controller may be defec- tive.)