40 Troubleshooting SEN02095-00 E-10 Fuel level monitor was lighted in red while engine running 1 Electrical circuit diagram related to fuel level sensor BR380JG-1E0 23 Trouble • Fuel level monitor was lighted in red while the engine running • Related • information If fuel level gauge on the machine monitor indicates red range, fuel level monitor turns red. Input signal (voltage) from the fuel level sensor can be checked with monitoring function. (Code 04200:
Fuel level sensor voltage) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting Low fuel level 1 (When system is nor- mal) aAdd fuel Defective fuel level sensor 2 (Internal disconnec- tion) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. S14 (male) Fuel level Resistance Between (1) – chassis ground FULL (Upper limit) Approx. 12 z EMPTY (Lower limit) 85 – 110 z Disconnection in wiring harness 3 (Disconnection in wir- ing or defective contact in connector) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON.
Wiring harness between P02 (female) (2) – A03 (7) – S14 (female) (1) Resistance Max. 1 z Defective machine 4 monitor aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. P02 (female) Fuel level Resistance Between (2) – chassis ground FULL (Upper limit) Approx. 12 z EMPTY (Lower limit) 85 – 110 z