Kaiyi BR380JG-1E0 — E-11 ENGINE COOLANT TEMPERATURE GAUGE DOES NOT INDICATE NORMALLY

SEN02095-00 40 Troubleshooting E-11 Engine coolant temperature gauge does not indicate normally 1 24 BR380JG-1E0 Trouble • While engine coolant temperature is rising normally, temperature gauge does not rise from white range (C). • While engine coolant temperature is stabilized normally, temperature gauge rises to red range (H). Related information • Input from the engine coolant temperature sensor (temperature) can be checked with monitoring function. (Code: 04107:

Engine coolant temperature) • Check if failure code for CAN communication error (machine monitor) system [DAFRMC] is indi- cated (if yes, diagnose that failure first.) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective coolant tem- perature sensor (Internal disconnec- tion or short circuit) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. coolant temperature sensor (male) Engine coolant temper- ature Resistance Between (B) – (A) 10 – 100°C 0.18 – 160 kz Between (B) – chassis ground Min.

1 Mz 2 Disconnection in wiring harness (Disconnection in wir- ing or defective contact in connector) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between CE01 (female) (15) – coolant temperature sensor (female) (B) Resistance Max. 1 z Wiring harness between coolant temperature sensor (female) (A) – chassis ground Resistance Max. 1 z 3 Ground fault in wiring harness (Short circuit with GND circuit) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between CE01 (female) (15) – coolant temperature sensor (female) (B) and chassis ground Resistance Min.

1 Mz 4 Hot short (Short circuit with 24V circuit) in wir- ing harness aPrepare with starting switch OFF, then turn starting switch ON and carry out troubleshooting. Wiring harness between CE01 (female) (15) – coolant temperature sensor (female) (B) and chassis ground Voltage Max. 1 V 5 Defective engine controller aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. CE01 (female) Engine coolant temper- ature Resistance Between (15) – chassis ground 10 – 100°C 0.18 – 160 kz