Kaiyi BR380JG-1E0 — E-13 THE HYDRAULIC OIL TEMPERATURE GAUGE DOES NOT DISPLAY NORMALLY

40 Troubleshooting SEN02095-00 E-13 The hydraulic oil temperature gauge does not display normally 1 Electrical circuit diagram related to machine monitor hydraulic oil temperature sensor BR380JG-1E0 27 Trouble • While the hydraulic oil temperature rises normally, the temperature gauge does not rise from the white range (C). • While the hydraulic oil temperature is stabled normally, the temperature gauge rises to the red range (H). Relative information • Input from the hydraulic oil temperature sensor (temperature) can be checked in the monitoring function of the machine monitor. (Code 04402:

Hydraulic oil temperature) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting Defective hydraulic oil temperature sensor 1 (Internal disconnec- tion or short circuit) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch ON. S17 (male) Hydraulic oil temperature Resistance Between (1) – (2) 25 – 100°C 3.5 – 90 kz Between (1) – chassis ground Min. 1 Mz Disconnection in wir- ing harness (Disconnection in wir- 2 ing harness or defec- tive contact in connector) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch ON.

Between P02 (female) (12) – A06 (11) – S17 (female) (1) Resis- tance Max. 1 z Between P02 (female) (13) – A06 (12) – S17 (female) (2) Resis- tance Max. 1 z Short circuit with chassis ground in wir- 3 ing harness (Contact with ground circuit) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch ON. Wiring harness between P02 (female) (12) – A06 (11) – S17 (female) (1) Resis- tance Min. 1 Mz Short circuit with power source in wiring 4 harness (Contact with 24-V circuit) aPrepare with starting switch OFF, then turn starting switch ON and carry out troubleshooting. Wiring harness between P02 (female) (12) – A06 (11) – S17 (female) (1) Voltage Max.

1 V Defective machine 5 monitor aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch ON. P02 (female) Hydraulic oil temperature Resistance Between (12) – (13) 25 – 100°C 3.5 – 90 kz Between (12) – chassis ground Min. 1 Mz