Kaiyi BR380JG-1E0 — E-16 THE CRUSHER ROTATION DIRECTION DOES NOT CHANGE

SEN02095-00 40 Troubleshooting E-16 The crusher rotation direction does not change 1 Electrical circuit diagram related to crusher forward-reverse selector switch 32 BR380JG-1E0 Trouble • The crusher rotation direction does not change. Relative informatio • The signals of the crusher forward-reverse selector switch can be checked in the monitoring func- tion of machine monitor. (Code 25002: Crusher rotation direction selector switch (ON = reverse)) n • The operation of the crusher rotation direction selector switch is ignored while the crusher is in operation.

Possible causes an standard val in normal st Cause Defective crusher rotation direction 1 selector switch (Internal disconnec- tion or short circuit) Disconnection in wir- ing harness (Disconnection in wir- 2 ing harness or defec- d tive contact in ue connector) ate Short circuit with chassis ground in wir- 3 ing harness (Contact with ground circuit) 4 Defective controller Standard value in normal state/Remarks on troubleshooting Defective crusher rotation direction selector switch (Internal disconnec- tion or short circuit) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch ON.

Selector switch B15 (male) Position of selector switch Resistance Between (2) – (4) FORWARD Min. 1 Mz REVERSE Max. 1 z Disconnection in wir- ing harness (Disconnection in wir- ing harness or defec- tive contact in connector) aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch ON. Wiring harness between C02 (female) (37) – B15 (female) (2) Resis- tance Max. 1 z Wiring harness between B15 (female) (4) – chassis ground Resis- tance Max.

1 z Short circuit with chassis ground in wir- ing harness (Contact with ground circuit) aPrepare with starting switch OFF (Turn crusher rotation direction selec- tor switch to normal rotation position), then carry out troubleshooting without turning starting switch ON. Wiring harness between C02 (female) (37) – B15 (female) (2) Resis- tance Min. 1 Mz Defective controller aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch ON. C02 (female) Position of selector switch Resistance Between (37) – chassis ground FORWARD Min. 1 Mz REVERSE Max. 1 z