Kaiyi BR380JG-1E0 — H-7 THE SPEED OR POWER OF THE CONVEYOR IS LOW

SEN02306-01 40 Troubleshooting H-7 The speed or power of the conveyor is low 1 14 BR380JG-1E0 Trouble • The speed or power of the conveyor is low. Relative information • Carry out the following troubleshooting when the travel speed is normal. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Malfunction of LS-EPC valve aPrepare with engine stopped, then run engine at high idle and carry out troubleshooting. Operation LS-EPC output pressure Turn conveyor switch ON Approx. 2.34 MPa {Approx. 23.9 kg/cm2} 2 Malfunction of acces- sory control valve (spool) The accessory control valve spool may have a malfunction.

Check it directly. 3 Malfunction of pressure compensation valve or pressure compensa- tion piston The pressure compensation valve or pressure compensation piston of the control valve may have a malfunction. Check them directly. 4 Disconnection in accessory EPC valve system Carry out troubleshooting according to failure code [7RFLKB]. 5 Defective operation of safety valve and suc- tion valve for accessory control valve. The safety valve and suction valve for control valve accessory port may be defective. Check it directly. 6 Defective conveyor motor Conveyor speed: 97 – 150 m/min