Kaiyi BR380JG-1E0 — H-19 THE MACHINE IS NOT STEERED WELL OR STEERING POWER IS LOW

40 Troubleshooting SEN02306-01 H-19 The machine is not steered well or steering power is low 1 BR380JG-1E0 25 Trouble • The machine is not steered well or steering power is low. Relative information • The steering may be heavy on rough grounds. • The steering may be heavy on rough grounds when the travel speed is low. • Before carrying out the troubleshooting, set the mode selector switch in the TRAVEL mode. • Carry out the following troubleshooting when the work equipment speed is normal.

Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Malfunction of travel PPC valve aPrepare with engine stopped, then run engine at high idle and carry out troubleshooting. Travel lever PPC valve output pressure Set lever in neutral 0 MPa {0 kg/cm2} 2 Malfunction of travel junction solenoid valve aPrepare with engine stopped, then run engine at high idle and carry out troubleshooting. Travel lever Solenoid output pressure Both sides are operated or neutral 0 MPa {0 kg/cm2} Operate one side 2.84 – 3.43 MPa {29 – 35 kg/cm2} 3 Malfunction of travel junction valve The travel junction valve may have a malfunction.

Check it directly. 4 Malfunction of travel control valve (spool) The travel control valve spool may have a malfunction. Check it directly. 5 Malfunction of travel control valve (pressure compensation valve) The pressure compensation valve of the travel control valve may have a malfunction. Check it directly. 6 Malfunction of travel control valve (suction valve) The suction valve of the travel control valve may have a malfunction. Check it directly. 7 Malfunction of shuttle valve The shuttle valve may have a malfunction. Check it directly.

(When radio control specification is installed) 8 Defective seal of check valve of LS pressure pickup plug The seal of the check valve of the LS pressure pickup plug may be defec- tive. Check it directly. 9 Malfunction of travel motor (safety valve) The seal of the safety valve of travel motor may be defective. Check it directly. aYou may judge by replacing the same motors between the forward and reverse units or between right and left units and checking the change of the phenomenon. 10 Malfunction of travel motor (Check valve) The seal of the check valve of travel motor may be defective. Check it directly.

aYou may judge by replacing the same motors between the forward and reverse units or between right and left units and checking the change of the phenomenon.