Kaiyi BR380JG-1E0 — S-2 ENGINE DOES NOT START

40 Troubleshooting SEN02307-00 S-2 Engine does not start 1 BR380JG-1E0 7 a) Engine does not turn General causes why engine does not turn q Internal parts of engine seized o See “S-4 Engine stops during operations” q Defective electrical system Causes Broken flywheel ring gear Defective or deteriorated battery Defective connection of battery terminal Defective battery relay Defective starting switch Defective safety relay Defective starting motor (motor section) Defective starting circuit wiring Check items Questions Confirm recent repair history Degree of use of machine Operated for long period E E Condition of horn when starting switch is turned ON Horn does not sound Q Q w Horn volume is low w Battery electrolyte is low w Battery terminal is loose w When starting switch is turned ON, there is no operating sound from battery relay Q w When starting switch is turned to START, starting pinion does not move out Q Q w When starting switch is turned to START, starting pinion moves out, but Speed of rotation is low w Makes grating noise w w Soon disengages again w Makes rattling noise and does not turn Q Q Q Troubleshooting Inspect flywheel ring gear directly q Carry out troubleshooting on E-mode When specific gravity of electrolyte and voltage of battery are measured, they are low q Turn starting switch OFF, connect cord, and carry out troubleshooting at ON There is not voltage (20 – 30 V) between battery relay terminal B and terminal E q When terminal B and terminal C of starting switch are connected, engine starts q When terminal B and terminal C at safety relay outlet are connected, engine starts q Even if terminal B and terminal C at safety relay outlet are con- nected, engine does not start q When safety switch terminal and terminal B of starting motor are con- nected, engine starts q Remedy Replace Replace Correct Replace Replace Replace Replace —