Kaiyi BR380JG-1E0 — REPLACING CHEEK PLATES

50 Disassembly and assembly SEN02738-00 Replacing cheek plates 1 3. After removing the upper and lower cheek plates, remove all dirt and sand from the cheek plate mounting faces (front, rear, right, and left). a In particular, remove all dirt and sand from both sides of the fixed jaw plate. q Prepare the special tools for the cheek plate. Part No. of eyebolt: 04530-11628 Part No. of bracket: 8240-98-1130 Part No. of clamping bolt: 01016-51240 1. Remove dirt and sand in hanging hole A of upper cheek plate (1) with an air gun or a wire brush, then lift off upper cheek plate (1) with the special tool. 4.

Insert new cheek plates in order from the low- est one along the fixed jaw plate and guide of the side frame. 4 Upper cheek plate: 74 kg 2. Remove dirt and sand in hanging hole A of lower cheek plate (2) with an air gun or a wire brush, then lift off upper cheek plate (2) with the special tool. 4 Lower cheek plate: 36 kg 5. After installing upper and lower cheek plates (1) and (2), tighten clamping bolts (3). BR380JG-1E0 3