50 Disassembly and assembly SEN02738-00 Turning over and replacing swing jaw plate 1 3. Check that swing jaw plate wedge (3) is loos- ened fully. Install wire (A) to the center, remove the remaining bolt, and sling the swing jaw plate wedge. a Push out the swing jaw plate about 30 mm so that you can easily install wire (A) to it. Removal 1. Loosen the bolt of the crusher inspection hatch, open the crusher inspection hatch, and fix it to the hook. 2. Loosen 2 swing jaw plate wedge bolts (1) and remove one of them. After removing swing jaw plate wedge spring (2), install the nut to the remaining bolt and keep that bolt inserted. 4.
Install hooks (A) to the hooks on the top of the swing jaw plate (4) and sling the swing jaw plate. 4 Swing jaw plate: 735 kg a After removing the swing jaw plate, remove all dirt and sand from the mount- ing face. Dirt and sand on the mounting face can cause a play of the swing jaw plate. BR380JG-1E0 5