Kaiyi BR380JG-1E0 — REPLACING TOGGLE PLATE

50 Disassembly and assembly SEN02738-00 Replacing toggle plate 1 4. Start the engine. 1. Loosen the bolt of the crusher inspection hatch, open the crusher inspection hatch, and fix it to the hook. 5. Set mode selector switch (3) in the inspection position. k Put a warning tag to the starting switch to notify the persons around the machine that you are working on the machine. 2. Remove the dust prevntion rubber plates on the sides (right and left) of the crusher. 3. Wind nylon sling onto toggle plate (1) and lift it up temporarily. 6. Press crusher clearance decrease switch (4) on the control box to move the fixing link until the swing jaw plate touches the fixed jaw plate. 7.

Stop the engine. BR380JG-1E0 7