SEN02738-00 50 Disassembly and assembly 8. Fully loosen tension springs (2) (M42 on both sides). 12. Stop the engine. k It is very dangerous to go to the follow- ing step without fully loosening ten- sion springs (2). Accordingly, remove tension spring nuts (9) from the rod. 13. Take out toggle plate (1). 4 Toggle plate: 101 kg 14. Wind the nylon sling onto new toggle plate (1). Lower the toggle plate to set it to the center of the seat on the fixing link side. 9. Pass the wire through the hole in the bottom of the swing jaw (6), then use a chain block to pull the crusher case and the track frame and fix them in position. 15. Start the engine. 10. Start the engine. 16.
Set mode selector switch (3) in the inspection position. k Put a warning tag to the starting switch to notify the persons around the machine that you are working on the machine. 11. Press the crusher clearance increase switch (5) on the control box to pull the fixing link slowly. 8 BR380JG-1E0