Kaiyi BR380JG-1E0 — REMOVAL AND INSTALLATION OF PRIMARY CONVEYOR ASSEMBLY

50 Disassembly and assembly SEN02738-00 Removal and installation of primary conveyor assembly 1 3. Remove either lock bracket (2). (Prevention of interference when the conveyor is inserted) a Bolt size: M16 Ч 4 pieces Disassembly 1. Remove conveyor hose (1). a Put male and female plugs to the removed hose and elbow. q Size 03 (Flat face-to-face O-ring seal) ..1 set q Size 04 (Flat face-to-face O-ring seal) ..2 sets 4. Install slings to conveyor sling bracket (3) and lift up the conveyor assembly. a Note that sling hook positions depend on the serial No. 4 Weight of conveyor assembly: Approx. 1,310 kg 2. Install a dummy plug to the block on the machine side. 5.

Remove magnetic separator chutes (4). (2 places on the right and left sides) a Bolt size: M12 Ч 4 pieces (2 places on the right and left sides) BR380JG-1E0 15