Kaiyi BR380JG-1E0 — HYDRAULIC PUMP

SEN01351-00 10 Structure, function and maintenance standard Operation of pump q Cylinder block (7) rotates together with shaft (1), and shoe (5) slides on flat surface (A). q As center line (X) of rocker cam (4) matches the axial direction of cylinder block (7) (swash plate angle (a) = 0), the difference between volumes (E) and (F) inside cylinder block (7) becomes 0. q When this happens, rocker cam (4) moves along cylindrical surface (B), so angle (a) between center line (X) of rocker cam (4) and the axial direction of cylinder block (7) changes. q Suction and discharge of pressurized oil is not carried out in this state. Namely pumping action is not performed.

(Actually, however, the swash plate angle is not set to 0) q (a) is named the swash plate angle. q With center line (X) of rocker cam (4) at a swash plate angle (a) in relation to the axial direction of cylinder block (7), flat surface (A) acts as a cam in relation to shoe (5). q In this way, piston (6) slides on the inside of cylinder block (7), so a difference between vol- umes (E) and (F) is created inside cylinder block (7). q A single piston (6) suctions and discharges the oil by the amount (F) – (E). q As cylinder block (7) rotates and the volume of chamber (E) becomes smaller, the pressurized oil is discharged.

q On the other hand, the volume of chamber (F) grows larger and, in this process, the oil is suc- tioned. 8 BR380JG-1E0