Acorn Computers BBC Micro Model B w/8271 — Acorn BBC Micro Model B w/8271 User Guide Manual PDF

361 If you forget what is on a tape then you can always use the command *CAT to obtain a ‘catalogue’ of the tape. When you give the command *CAT (and press the PLAY button on the recorder) the tape will play through, and the computer will print a catalogue of all the programs onto the screen. The catalogue gives the program name, the number of blocks (rather like pages in a book) used to record the program and lastly the length of the program (the number of letters in the book). It also checks that the recording is readable and reports any errors.

As the catalogue is building up on the screen you will often see something like this This indicates that the computer has found a file called SKETCH and that it is currently checking block 2 of that file. The block number is given in hexadecimal not decimal numbers. Press ESCAPE at the end of the tape to get back control of the computer. SKETCH 02 Saving a BASIC program A program that you have typed into the computer’s memory can be saved onto cassette tape in the following way: 2. Type SAVE"PROG" and press RETURN . 1. Insert the cassette into the recorder. PROG is just an example of a file name; file names are explained later in this chapter. 3. The message RECORD then RETURN will appear.

Now use the fast forward and reverse buttons to position the tape at the correct place. 4. Press the RECORD and PLAY buttons on the cassette recorder. 5. Press the RETURN key on the computer to let it know that everything is now ready. 6. The computer will then record your program. 7. The tape will automatically stop when the computer has finished recording your program. You can always abandon this process by pressing ESCAPE .