Acorn Computers BBC Micro Model B w/8271 — Acorn BBC Micro Model B w/8271 User Guide Manual PDF

360 35 Cassette files This chapter summarises the facilities available for file handling using a cassette recorder. Refer to chapter 5 for an introduction to loading and saving BASIC programs. Cassette motor control Some cassette recorders have a ‘remote’ or ‘automatic’ motor control socket. This can be used with a switch on the microphone to start and stop the tape. If your recorder is of this type then the computer will be able to start and stop the tape automatically at the start and end of each BASIC program or section of recorded data. If your cassette recorder does not have motor control then you will have to start and stop the tape manually.

A light is provided on the keyboard to tell you when the tape should be running. This is labelled ‘cassette motor’. When it is on, the tape should be running. The description which follows assumes that you have automatic or remote motor control. If you don’t then you’ll have to start and stop the tape manually. Many cassette recorders employ automatic record level. Recorders of this type do not have any ‘record level’ controls. If your recorder does not have automatic record level then you will have to set the record level yourself. Set the control so that the recording level indicator is slightly below the ‘0dB’ level or the red mark.

Recording levels Playback volume and tone It is important that the playback volume is set correctly. You will need to experiment to find the correct level for your machine. The tone control should normally be set to ‘maximum’ or ‘high’. Keeping an index of programs You will be able to record a large number of BASIC programs on a single cassette. However it is vital that the programs do not overlap on the tape. If they do then you will lose one of them. Beware of recording on the blank leader tape – always wind it on a little first.