Acorn Computers BBC Micro Model B w/8271 — Acorn BBC Micro Model B w/8271 User Guide Manual PDF

400 *FX3 is used to select whether output appears (or not) on different output streams. *FX3 is followed by one number, eg *FX3,4 . The second number should be considered in its binary form, because the value of each bit determines the effect of the command. Here is a list of the bits involved, and the effect of each bit when its value is 1.

bit 0 enable RS423 driver bit 1 disable VDU driver bit 2 disable printer driver completely bit 3 enable printer driver (as long as bit2 at 0) bit 4 disable SPOOL d output bit 5 not used bit 6 disable printer driver unless character preceded by CTRL A or VDU1 (as long as bit1 and bit2 at 0) bit 7 not used Here are some useful values in the table below Printer Screen RS423 *FX3,0 enabled on off *FX3,1 enabled on on *FX3,2 enabled off off *FX3,3 enabled off on *FX3,4 off on off *FX3,5 off on on *FX3,6 off off off *FX3,7 off off on *FX3,8 on on off *FX3,9 on on on *FX3,10 on off off *FX3,11 on off on *FX3,12 off on off *FX3,13 off on on *FX3,14 off off off *FX3,15 off off on *FX3,0 to *FX3,3 ‘enable’ the printer, which means that VDU2 (or CTRL B) will send output to printer.

Values from 0 to 3, 8 to 12, 16 to 19 etc are affected by *FX5 . Values from 16 to 31 are equivalent to values from 0 to 15, except that *SPOOL output is turned off.